Xpert bottom bracket bearing extruder for ø46mm , E294

IceToolz bottom bracket extruder up to 35 to 46mm

The IceToolz bottombracket extruder is an easy tool to properly remove the bottom bracket bearing without damaging the frame. This bottombracket extruder with IceToolz catalogue number E293 is suitable for bearings up to 46mm. With this Cr-Mo steel bottom bracket, you have something solid in your hands.

IceToolz bottombracket extruder for removal from the frame without damage

This IceToolz bottombracket extruder is suitable for the bottombrackets with sizes 35- to 46mm. The Cr-Mo steel extruder makes it very easy to remove the headset cups and some sizes of bottombracket the right way. The bottombracket extruder works as follows. The stroke side of the bone racket extruder is inserted through the bearing so that the 4 springy parts on the other side of the bone racket extruder are pushed together and so pass through the bearing until the bone racket extruder is inside the bottom bracket. The four suspension parts are now inside the bottom bracket and can be pressed back against the bearing. The sprung parts of the bottom bracket extruder now touch the outer shell of the bottom bracket. Now you can carefully tap the striking side of the bottom bracket extruder with a (rubber) hammer until the bearing is out of the frame. (NB: be careful with carbon frames if the bearings are glued).

IceToolz: the choice of professionals and do-it-yourselfers!

Item number 240E294

EAN number 4718152142948

Height outer box

220 mm

Number in inner box

1

Number in outer box

50

Unit weight

0.09 kg

Unit weight including packaging

0.09 kg

Length outer box

440 mm

Width outer box

340 mm

Packaging type

Box (carton)

Unit length

163 mm

Unit width

56 mm

Unit length including packaging

180 mm

Unit width including packaging

70 mm

Unit height including packaging

50 mm